User manual

1
Operation Guide 5030/5092
MA0906-EA
About This Manual
• This watch is available with either of two display types: Type A and Type B. All of the
examples in this manual show Type A.
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
Timekeeping Mode Calendar Mode Alarm Mode Dual Time Mode Stopwatch Mode
Press .
General Guide
• Press B to change from mode to mode.
Timekeeping
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.
Setting the Digital Time
Use the Timekeeping Mode to set and view a digital
display of the current time. When setting the digital time,
you can also configure settings for the 12/24-hour format.
4. Press C to exit the setting screen.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
To adjust the analog time
In any Mode, press A to advance the analog time setting by 20 seconds.
• Holding down A advances the analog time setting at high speed.
Calendar
The watch’s calendar normally makes allowances for
different month lengths. However, you will have to adjust
the date manually in the case of leap years.
• All of the operations in this section are performed in the
Calendar Mode, which you enter by pressing B.
To set the digital time
1. In the Timekeeping Mode, hold down C until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Seconds Hour Minutes
(Exit the setting screen) 12/24-Hour format
3. When the setting you want to change is flashing, use B to change it as described
below.
Hour : Minutes
PM indicator
Seconds
Screen To do this:
Reset the seconds to
Change the hour or minutes
Toggle between 12-hour ( ) and 24-hour ( )
timekeeping
Do this:
Press B.
To set the date
1. In the Calendar Mode, hold down C until the month
start to flash, which indicates the setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Month Day
(Exit the setting screen) Day of the week
3. When the setting you want to change is flashing, use B to change it as described
below.
Day
Month
Day of the week
Type A Type B
4. Press C to exit the setting screen.
Screen To do this:
Change the month
Change the day
Change the day of the week
Do this:
Press B.