User manual

●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Move the phone close to (within one meter
of) the watch.
3.
X
Press (D).
[TIME] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
●
At this time your current location is
recorded by your phone.
After time
adjustment
Trying to connect
Note
●
The connection is terminated
automatically after time adjustment is
complete.
●
If time adjustment fails for some
reason, [ERR] will appear.
●
[RCVD] flashes when the receive
operation starts, and [RCVD] stops
flashing after it is complete.
Receiving CASIO WATCHES
Information On the Watch
You can configure settings so the watch
receives CASIO WATCHES update and other
information whenever it connects with a phone
to adjust its current time setting.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on your
phone screen to enable app info receive.
Note
●
If app info receive is turned on, the
watch receives CASIO WATCHES
information as described below.
ー
Each time the watch automatically
adjusts its time setting (four times a
day)
ー
When you press (D) in the
Timekeeping Mode to adjust the
watch time setting
ー
When you hold down (C) for at least
three seconds to connect the watch
with a phone.
●
When CASIO WATCHES information
is received while the watch is in the
Timekeeping Mode, the watch
automatically switches to the app info
screen.
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCHES causes the watch’s World Time
City to change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Note
●
CASIO WATCHES World Time lets
you select from among approximately
300 cities as the World Time City.
●
You can use CASIO WATCHES to
configure settings for user cities that
are not included in the watch’s built-in
World Time Cities. You must use
CASIO WATCHES to select a user city
as your World Time City.
●
Selecting a World Time City
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Watch Operation Guide 3509
10