User manual

Digital Compass
Q1
The symbol is shown on the
display.
Abnormal magnetism has been detected.
Move away from any potential source of
strong magnetism and try taking a reading
again.
●
If appears again, it could mean that the
watch body has become magnetized. Move
away from any potential source of strong
magnetism, perform direction calibration,
and then try taking a reading again.
l
Calibrating Compass Readings
l
Digital Compass Reading Precautions
Q2
[ERROR] appears during
measurement.
There is a problem with the sensor or there
may be a source strong magnetic force
nearby. Move away from any potential source
of strong magnetism and try taking a reading
again. If [ERROR] keeps appearing after
multiple measurement attempts, contact a
CASIO service center.
l
Digital Compass Reading Precautions
Q3
[ERROR] appears on the display
following direction calibration.
If [- - -] is followed by [ERROR] on the display,
it could mean there is something wrong with
the sensor.
●
If [ERROR] disappears after about one
second, try performing bidirectional
calibration again.
●
If [ERROR] continues to appear even after
multiple attempts, contact a CASIO service
center.
Q4
Direction information indicated by the
watch is different from that indicated
by a backup compass.
Move away from any potential source of
strong magnetism, perform bidirectional
calibration, and then try taking a reading
again.
l
Calibrating Compass Readings
l
Digital Compass Reading Precautions
Q5
Readings at the same location
produce different results.
Cannot take readings indoors.
Move away from any potential source of
strong magnetism and try taking a reading
again.
l
Digital Compass Reading Precautions
Barometric Pressure
Measurement
Q1
[ERROR] appears during
measurement.
There may be a problem with the sensor. Try
taking another measurement. If [ERROR]
keeps appearing after multiple measurement
attempts, contact a CASIO service center.
Temperature Measurement
Q1
[ERROR] appears during
measurement.
There may be a problem with the sensor. Try
taking another measurement. If [ERROR]
keeps appearing after multiple measurement
attempts, contact a CASIO service center.
Alarms
Q1
The alarm does not sound.
Is the watch’s battery charged?
Charge the watch until the battery is
sufficiently recharged.
l
Charging the Watch
Is the alarm enabled?
Enable the alarm.
l
To turn an alarm on or off
Operation Guide 3452
41