User manual

E-64
To display your current altitude
1. Press A in the Timekeeping Mode or in any
of the other sensor modes to enter the
Altimeter Mode.
• The watch will start altitude measurement
automatically, and display the result.
• It can take up to four or five seconds for the
altitude reading to appear after you enter
the Altimeter Mode.
2. Leave the watch in the Altimeter Mode if you
want the displayed altitude value and the
altitude graph contents to be updated at
regular intervals.
• Readings are taken at five-second intervals for the first three minutes
after you enter the Altimeter Mode. After that, readings are taken at two-
minute intervals.
• If you want to restart the altitude measurement operation at any point,
press A.
3. To stop the altitude measurement operation, press D to exit the Altimeter
Mode.
Current altitude
Altitude
graph
Current time