User manual

E-31
What you should do
• Enter the Receive Mode
and try again.
• Select one of the cities
to the left as your Home
City (page E-14).
• Perform manual signal
receive or wait until the
next auto signal receive
operation is performed.
Problem
Cannot perform
manual receive.
Auto receive is
turned on, but
the settings
updated
indicator ( )
does not appear
on the display.
Probable Cause
• The watch is not in the Receive
Mode.
• Your current Home City is not
one of the following: LON, PAR,
BER, ATH, HKG, SEL, TYO,
HNL, ANC, LAX, DEN, CHI, or
NYC
• You changed the time setting
manually.
• You changed the DST setting of
your Home City in the World
Time Mode.
• You pressed a button while signal
receive was in progress.
Signal Reception Troubleshooting
Check the following points whenever you experience problems with signal
reception.