User manual

E-27
To perform manual receive
1. Enter the Receive Mode (page E-10).
2. Place the watch on a stable surface so its 12
o’clock side is facing towards a window (page
E-17).
3. Hold down A for about two seconds until RC!
appears on the display.
• Time calibration signal reception takes from
two to seven minutes, but in some cases it can
take as long as 14 minutes. Take care that you
do not perform any button operations or move
the watch during this time.
• If the receive operation is successful, the
reception date and time appear on the display,
along with the GET indicator.
The watch will enter the Receive Mode if you
press A or if you do not perform any button
operation for about one or two minutes.
l
l
l
l
l
l
l
l
l
l
l
l
l
Receiving
Receive successful