User manual

E-26
• Use the receiving indicator as a guide for checking signal strength and for
finding the best location for the watch during signal receive operations.
• Following reception of the time calibration signal and calibration of the
watch’s time setting, a “settings updated” indicator ( ) will remain on the
display in all modes. The settings updated indicator ( ) will not be
displayed if signal reception was unsuccessful or after you adjust the
current time setting manually.
• The settings updated indicator ( ) appears only when the watch is able to
receive both time and date data successfully. It does not appear when only
time data is received.
• The settings updated indicator ( ) indicates that at least one of the auto
calibration signal receive operations was successful. Note, however, that
the indicator disappears from the display each day at the start of the first
auto receive operation of the day.