User manual

ManualsBrandsCasio ManualsWatch2618

USER’S GUIDE 2618

MO0212-A

About This Manual

• The display of this watch uses two LCD panels that

make it possible to display icons, numbers formed with

segments, dot matrix characters, etc.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

General Guide

No matter what type of operation you want to perform with

this watch, the first step is always to select the proper

mode. Use the Mode Menu screen to select a mode.

• The Mode Menu screen shows icons for each of the

modes.

• Holding down A while the Mode Menu screen is on the

display replaces the current time with the current date.

To change modes

1. While the Mode Menu screen is on the display, press

B or D.

• This causes one of the icons on the screen to flash.

• If another screen is on the display, press C to display

the Mode Menu screen before performing the above

step.

• The flashing stops if you do not perform any operation

for about 10 seconds after performing the above step.

Icons

Seconds

Hour : Minutes

Hold

downA

Day of week

Month – Day

2. While an icon is flashing on the Mode Menu screen, use B and D to move it to

the icon whose mode you want to access.

• The following shows the name of the mode that corresponds to each icon.

Mode

Timekeeping World Time e-DATA MEMORY

Mode

Alarm Snooze Alarm Stopwatch

Mode

Remaining Memory

Time Memo Recall

Icon

Press D. Press B.

The

(REMAIN) icon simply shows remaining time

memo memory, without changing to another mode.

Because of this, the

icon does not flash. For

details about the

icon, see “To recall time memos”.

3. Press C to enter the mode whose icon is flashing.

• Simply pressing C while the

(MEMO: Time Memo

Mode) icon is flashing does not enter the Time Memo

Mode. See “Time Memo” for more information.

• After entering any mode, you can return to the Mode

Menu screen by pressing C again.

• In any mode and while the Mode Menu screen is on the

display, press L to illuminate the display.

Timekeeping Mode

Day of week

Hour :

Minutes

Seconds

Year Month – Day

3. Press C to move the flashing in the sequence shown below to select the other

settings.

Seconds

Home City

Code

12/24-Hour

Format

DST

Day Month Year Minutes

Hour

5. Press A to exit the setting screen.

• See “Daylight Saving Time (DST)” below for details about DST setting.

Screen

OFF

TYO

12H

10:58

03 6-30

To do this:

Reset the seconds to

Toggle between Daylight Saving Time (ON)

and Standard Time (

OFF)

Change the Home City code

Toggle between 12-hour (

12H) and 24-hour

(

24H) timekeeping

Change the hour or minutes

Change the year, month, or day

Do this:

Press D.

Use D (east) and B(west).

Press D.

Press D (to increase).

4. When the setting you want to change is flashing, use B and D to change it as

described below.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time (

OFF

displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

Time Memo

The Time Memo feature of your watch lets you create up to 100 time memos, each of

which includes fields for time, date, data tag, and text. Time memos come in handy

when you need to keep track of your activities. Time memos are automatically sorted

chronologically on their date and time fields. You can recall records by scrolling

through them on the display.

• You can create a time memo starting from the Mode Menu screen or from the

Timekeeping Mode.

• Use the Recall Mode to recall time memos and to input time memo text.

• You can assign any one of the following nine data tags to a time memo.

, (Precaution), , (Medicine), , , ,

To create a time memo starting from the Mode Menu screen

1. On the Mode Menu screen, use B and D to move the

flashing to

(MEMO: Time Memo Mode icon).

2. Hold down C until the word

SAVE, along the time

and date recorded for the time memo appear on the

display.

• Wait anywhere from one to ten seconds (depending

on remaining memory capacity and other memory

conditions) after

SAVE appears for the indicator

to start flashing on the display.

3. While

is flashing on the display, press B to display

the data tag panel, with the

tag flashing.

• The word

MEMO is at the top of the display screen

while the data tag panel is on the display.

4. Press B to move the flashing to the right, and move it

to the data tag you want to select.

• Pressing B while the

tag is flashing causes

the word at the top of the display screen to change to

FREE. None of the data tags are flashing at this

time, so you can use this screen to input a time memo

without a data tag. Pressing B again causes the

tag to flash again.

Time

Date

5. After selecting a data tag or the FREE screen, press C to return to the Mode

Menu screen.

• The watch automatically returns to the Mode Menu screen if you do not perform any

button operation for a few minutes after the

or a data tag starts flashing.

To create a time memo from the Timekeeping Mode

1. Enter the Timekeeping Mode.

2. Hold down D until the word

SAVE, along the time and date recorded for the time

memo appear on the display.

• Wait anywhere from one to ten seconds after

SAVE appears for the indicator

to start flashing on the display.

3. For the remainder of this procedure, perform the steps starting from step 3 under

“To create a time memo starting from the Mode Menu screen”, above.

• Holding down D while

is flashing on the display in step 2 of the above procedure

stores another time memo. In this case, however, the previous time memo is saved

without a data tag.

• After selecting a data tag or the

FREE screen, press C to return to the

Timekeeping Mode screen.

• The watch automatically returns to the Timekeeping Mode screen if you do not

perform any button operation for a few minutes after the

or a data tag starts

flashing.

To set the current time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to move the flashing to the Home City

code setting (see the illustration below), and then use

B and D to select the code you want.

• Make sure you select your Home City code before

changing any other setting.

• For full information on city codes, see the “City Code

Table”.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

• All of the operations in this section are performed in the

Timekeeping Mode, which you can enter from the Mode

Menu screen.

Setting the Time and Date

Note that all of the World Time Mode times are displayed

in accordance with the Home City code (the code for the

city where you normally use the watch) that you select in

the Timekeeping Mode.

• Once you correctly set your Home City time and date,

you can set the watch up for timekeeping in another time

zone by simply changing the Timekeeping Mode Home

City code.

Hour : Minutes

indicator

Day of week

Year Month – Day

Seconds

Summary of content (4 pages)

PAGE 1
MO0212-A USER’S GUIDE 2618 About This Manual • The display of this watch uses two LCD panels that make it possible to display icons, numbers formed with segments, dot matrix characters, etc. • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. (Light) 3.
PAGE 2
USER’S GUIDE 2618 e-DATA MEMORY You can use the watch’s e-DATA MEMORY to store e-mail Managing Time Memos Time (Hour : Minutes Seconds) Date (Month – Day) Remaining memory graphic Data tag You can use the Recall Mode to recall time memos, to input text into time memos, and to delete time memos. Use the procedure under “To change modes” to enter the Recall Mode and perform the operations in this section.
PAGE 3
USER’S GUIDE 2618 To input the password 1. Enter the e-DATA MEMORY Mode. 2. On the Password Input screen ( PA55), press D. This causes the first digit of the password to flash. 3. Input the password. • Input the password you registered or 0000. • Use D (+) to scroll through numbers at each digit. • Press C to advance to the next digit. 4. After the password is the way you want, press C. • If the input password matches the one registered, the word OK! appears, followed by an e-DATA MEMORY screen.
PAGE 4
USER’S GUIDE 2618 Inputting Text The following describes how to input text in the Recall Mode, e-DATA MEMORY, Alarm, and Snooze Alarm Modes. To input characters 1. When the cursor is on the display, press D to cycle through the available letters, numbers and symbols, in the sequence shown below. Cursor (space) a to z (lower-case) to ) (symbol) Recall Mode A to Z (upper-case) 0 to 9 (number) 2. When the character you want is at the cursor position, press C to move the cursor to the right. 3.