User manual

2269-3
1/100
second
Minutes
Seconds
Minutes
Seconds
Hours
Alarm on indicator
Hourly time signal on
indicator
HOSSEGOR
■ PIPELINE
■
■
■ TORAMI
■
REUNION
FIGUEIRA ■
■
JEFFREY
HUNTNGTN
■
■
RIO
EAST JAVA
■
GOLD CST
GMT
differential
Lunar Tide
Interval
Point name Longitude Latitude
TORAMI 140° E35° N 9 4:50
GOLD CST 154° E28° S 10 8:30
PIPELINE 158° W22° N –10 3:00
HUNTNGTN 118° W34° N –8 9:20
RIO 43° W23° S –3 3:00
FIGUEIRA 9° W40° N 0 2:10
HOSSEGOR 1° W44° N 1 3:10
JEFFREY 25° E34° S 2 3:10
REUNION 55° E21° S 4 1:40
EAST JAVA 114° E9° S 7 10:40
To use the countdown alarm
1. Press D while in the Countdown Timer Mode to start the countdown alarm.
2. Press D again to stop the countdown alarm.
• You can resume countdown alarm operation by pressing D.
3. Press D to stop the countdown alarm, and then press B to reset the countdown
time to its starting value.
• When the end of the countdown is reached and auto repeat timing is off, the alarm
sounds for 10 seconds or until you stop the alarm by pressing any button.
Countdown timing stops and the countdown time is automatically reset to its starting
value after the alarm stops.
• When the end of the countdown is reached while auto repeat is on, the alarm
sounds, but the countdown restarts from the beginning without stopping. You can
stop the countdown by pressing D and manually reset to the start time by pressing
B.
• If you set a starting time of 10 seconds or less and have Auto Repeat turned on, the
countdown alarm tone (which normally sounds for 10 seconds) sounds for only one
second.
To turn the progress beeper on and off
While the Countdown Timer Mode screen shows its starting value or while a
countdown operation is in progress, press B to toggle the progress beeper on and
off.
OFF ON
• When the progress beeper is turned on, the watch beeps as the countdown time
passes the 10, 5, 4, 3, 2, and 1-minute marks, and the 50, 40, 30, 20, 10, 5, 4, 3, 2,
and 1-second marks.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes 59 seconds. You can use the EL
backlight at any time while the stopwatch is operating by
pressing E.
• For the first 60 minutes, the screen shows minutes,
seconds, and 1/100 second. After 60 minutes, the
screen format changes to show hours, minutes, and
seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
Elapsed time measurement
Start
Stop Re-start Stop Clear
Start
Split Split release Stop Clear
Start
Split Stop Split release Clear
Split time measurement
Split time and 1st-2nd place times
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
Auto-Start
In addition to the normal instant start at the press of a
button, the stopwatch can also be set up to start timing
automatically after five seconds have elapsed.
• While the stopwatch is stopped and cleared to all zeros,
press A to toggle auto-start on and off. Turning on
auto-start displays 5 in the lower part of the display. 00'
00" 00 is displayed when auto-start is turned off.
ALARM MODE
You can set three independent alarms with the hour,
minutes, month and day. Use the Alarm Mode to turn the
alarm and the Hourly Time Signal on and off.
• When an alarm is turned on, an alarm tone sounds for
20 seconds when the preset time reached.
• When the Hourly Time Signal is turned on, the watch
beeps every hour on the hour.
Alarm types
The types of alarm you get depends on the information
you set.
• To set a daily alarm
Set the hour and minutes for the alarm time. Set “xx” for the
month and day. This type of setting causes the
alarm to sound everyday at the time you set.
• To set a date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
• To set a 1-month alarm
Set the month, hour and minutes for the alarm time. Set “xx” for the day. This type
setting causes the alarm to sound every day at the time you set, only during the
month you set.
• To set a month alarm
Set the day, hour and minutes for the alarm time. Set “ xx ” for the month. This type of
the setting causes the alarm to sound every month at the time you set, on the day you
set.
Day
Month
Alarm on indicator
Alarm number
Hour : Minutes
To set the alarm time
1. Press E while in the Alarm Mode to select Alarm 1 through Alarm 3 and Hourly
Time Signal.
Alarm 1 Alarm 3Alarm 2
Hourly Time Signal
2. After you select an alarm, hold down A until the hour digits start to flash on the
display. The hour digits flash because they are
selected . At this time the Alarm is
automatically switched on.
3. Press C to change the selection in the following sequence.
Hour Minutes Month Day
4. Press E to increase the number or B to decrease it. Holding down either button
changes the current number at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
5. After you set the alarm time, press A to return to the Alarm Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
To stop the alarm
• Press any button to stop the alarm after it starts to sound.
To switch an alarm on and off
1. In the Alarm Mode, press E to select an alarm.
2. When an alarm you want to is selected, press B to
switch it on and off.
• If any alarm is on, the alarm on indicator is shown on
the display when you change to another mode.
To switch the Hourly Time Signal on and off
1. In the Alarm Mode, press E to select the Hourly Time
Signal.
2. When Hourly Time Signal is selected, press B to
switch it on and off.
• If Hourly Time Signal is on, the Hourly Time Signal On
indicator is shown on the display when you change to
another mode.
To test the alarm
Hold down E while in the Alarm Mode to sound the
alarm.
PRESET LOCATION CHART