User manual

2153-1
Module No. 2153
GENERAL GUIDE
• Press
AA
AA
A to change from mode to mode.
• In any mode (except when making settings) press
LL
LL
L to illuminate the display for about two seconds.
DAY COUNTER MODE
The Day Counter Mode lets you count the number of days from the Timekeeping
Mode’s current date to a specific target date.
• There are 5 Day Counter records, each of which can be set with its own icon and
target date.
• When a target date is reached, the DAYS indicator flashes on the display in the
Timekeeping Mode. The DAYS indicator also flashes in the Day Counter Mode
when the screen for the target date is on the display.
• The DAYS indicator flashes on the target date each year, regardless of the year
setting of the target date.
Recalling Day Counter Data
In the Day Counter Mode, press
CC
CC
C to scroll through the Day Counter record screens.
• The Day Counter Mode shows the number of days from today to the target date,
regardless of whether the target date is in the past or future.
Setting Day Counter Data
1. In the Day Counter Mode, press
CC
CC
C to display a record number you no longer need.
2. Hold down
BB
BB
B until the year digits start to flash on the display.
3. Press
AA
AA
A to change the selection in the following sequence.
Year Month Day Icon
4. Press
CC
CC
C to increase the number or
LL
LL
L to decrease it. Holding down either button
changes the digits at high speed.
• Holding down
AA
AA
A sets today as the target date. You can then make any changes in
the date you want.
• Use
CC
CC
C and
LL
LL
L to cycle through the icons in the sequence shown below. Holding
down either button changes the icon at high speed.
5. After you set the target dates and icons, press
BB
BB
B to return to the Day Counter
Mode.
• The date can be set with the range of January 1, 1940 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Day Counter Mode automatically.
Target date (Year Month - Day)
Alternate at 2-second intervals
Number of days
Record number
DAYS
Timekeeping Mode
Animation Display
Time Display
Day Counter Mode
Alarm Mode
Animation Roulette
Game Mode
Alternate at 2-second intervals
TIMEKEEPING MODE
Press
CC
CC
C.
• Hold down
CC
CC
C to switch the display between 12-hour and 24-hour format.
• Press
CC
CC
C to switch the display between animation display and time display.
To set the time and date
1. While in the Timekeeping Mode, hold down
BB
BB
B until the seconds digits flash on the
display.
2. Press
AA
AA
A to move the flashing around the display in the following sequence.
Seconds
Day
Hour Minutes
YearMonth
3. While the seconds setting is selected (flashing), press
CC
CC
C to reset it to 00. If you
press
CC
CC
C while the seconds setting is in the range of 30 to 59, the seconds are reset
to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to
29, the minutes count is unchanged.
• While any other setting (besides seconds) is selected (flashing), press
CC
CC
C to in-
crease it. Holding down
CC
CC
C changes the setting at high speed.
4. After you set the time and date, press
BB
BB
B to return to the Timekeeping Mode.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not press any button for a few minutes while a setting is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
SYNCHRO ANIMATION
• While an animated figure is on the Timekeeping Mode screen, angling the watch
towards your face causes the icon to move.
Parallel to ground 40 °
• The witch icon periodically changes the animated figures in accordance with the
number of times you angle the watch towards your face.
• The number of ● marks increases each time the broom riding witch appears.
• When the number of ● marks increases, a special animation appears on the screen.
• At 3 o’clock on the following day, all of the ● marks are cleared from the display and
the animated display restarts from the first broom riding witch.
ABOUT THE BACKLIGHT
• In any mode (except when making settings) press
LL
LL
L to illuminate the display for
about two seconds.
• The backlight of this watch employs an electro-luminescent (EL) light, which loses
its illuminating power after very long term use.
• Frequent use of the backlight shortens battery life.
• The watch emits an audible sound whenever the display is illuminated. This does
not indicate malfunction of the watch.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
PM indicator
Day of week
Month - Day
Hour
Minutes
Animation
Hour Seconds
Minutes