User manual

ManualsBrandsCasio ManualsWatch2072

2072-1

Module No. 2072

ABOUT THIS MANUAL

• Button operations are indicated using the letters shown in the illustration.

• Display characters appear either as black-on-white or white-on-black, depending on the model of your watch. All sample displays in this manual are shown as

black-on-white.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be

found in the “REFERENCE” section.

GENERAL GUIDE

• Press

A to change from mode to mode.

• When you return to the Timekeeping Mode from another mode, the Home City code appears first, followed after a few seconds by the current time. See “TIMEKEEPING MODE” for

details.

TIMEKEEPING MODE

In addition to normal timekeeping, use the Timekeeping Mode to set the current time

and date. You can also momentarily display the World Time screen.

Setting the Current Time

Use the following procedure to select a city (city code) as

your Home City, and then set its time and date.

• The times in the Timekeeping Mode and World Time

Mode are linked. Because of this, make sure you select

a “Home City” (the city whose time and date you are

setting), before you set the time and date.

• Changing the city code setting usually changes the time

setting and sometimes changes the date setting.

• Once you select a Home City and set its time, you can

view the current time in other cities by simply changing

the city code setting.

To set the current time

1. In the Timekeeping Mode, hold down

B until the city

code starts to flash.

2. Use

A and

C to scroll through the city codes until the

one you want to set as your Home City.

•

C scrolls forward, while

A scrolls back through city

codes.

• See the “CITY CODE TABLE” at the back of this manu-

al for a complete list of available codes.

3. Press

B to move the flashing in the sequence shown

below to select other settings.

Hour

Seconds

Minutes

Month

Day Year

City Code DST On/Off

• See “Daylight Saving Time (DST)” for details on DST On/Off setting.

4. Press

until the seconds digits are flashing on the display.

5. While the seconds digits are selected (flashing), press

C to reset the seconds to

AA.

• Pressing

C while the seconds count is in the range of 30 to 59 resets the seconds

to AAand adds 1 to the minutes. In the range of 00 to 29, the minutes count is

unchanged.

6. Press

until the hour digits are flashing on the display.

7. Press

to increase the setting or

to decrease it.

8. Repeat steps 6 and 7 to set the minutes, year, month, and day.

9. After you make the settings you want, hold down

B until the digits on the display

stop flashing.

Viewing the Current Date and World Time Mode Screens

In the Timekeeping Mode, press

B to display the current date screen, and

C to

display the World Time Mode screen. The screen you select remains on the display

for a few seconds, and then the watch returns to the current time.

[Date] [World Time Mode]

• The six digits of the date screen show the year, month and day. The date indicated

in the example above is June 30, 1999.

Timekeeping Mode

World Time Mode Day Counter Mode File Mode

PM indicator

Seconds

Hour : Minutes

City code

Year Month Day

Day of week

Home city code

City code

Current time in the

selected city

Home city code

Daylight Saving Time (DST)

Daylight Saving Time automatically advances the time setting by one hour from Stan-

dard Time. Remember that not all countries or even local areas use Daylight Saving

Time.

To toggle your Home City time between DST and Standard Time

1. In the Timekeeping Mode, hold down

B until the city

code starts to flash.

2. Press

B once to move the flashing to the DST On/Off

setting.

3. Press

C to toggle Daylight Saving Time (AN displayed)

and Standard Time (

displayed).

4. After you make the settings you want, hold down

until the setting on the display stops flashing.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

WORLD TIME MODE

The World Time Mode lets you view the current time in

any one of 40 cites around the world. You can also mo-

mentarily display the current date in the selected city and

the Timekeeping Mode time (Home City time).

Selecting the World Time City

1. In the World Time Mode, hold down

B until the city

code starts to flash.

2. Use

A and

C to scroll through the city codes until the

one you want is on the display.

•

C scrolls forward, while

scrolls back through city

codes.

• See the “CITY CODE TABLE” at the back of this manu-

al for a complete list of available codes.

3. Hold down

until the setting on the display stops flash-

ing.

Viewing the Current Date and Timekeeping Mode Screens

In the World Time Mode, press

B to display the current date of the selected city

code, and

C to display the Timekeeping Mode screen. The screen you select re-

mains on the display for a few seconds, and then the watch returns to the current

time of the selected city code.

[Date] [Timekeeping Mode]

• The six digits of the date screen show the year, month and day. The date indicated

in the example above is June 30, 1999.

Toggling World Time between DST and Standard Time

Use the following procedure to toggle between Standard Time and Daylight Saving

Time.

1. In the World Time Mode, hold down

B until the city

code starts to flash.

2. Press

B once to move the flashing to the DST On/Off

setting.

3. Press

C to toggle Daylight Saving Time (AN displayed)

and Standard Time (

displayed).

4. Hold down

B until the setting on the display stops flash-

ing.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

DST indicator

City code

Current time in the

selected city

Year Month Day

Day of week

Selected city code

Home city code

Home city time

Selected city code

DST indicator

Summary of content (3 pages)

PAGE 1
Module No. 2072 2072-1 ABOUT THIS MANUAL • Button operations are indicated using the letters shown in the illustration. • Display characters appear either as black-on-white or white-on-black, depending on the model of your watch. All sample displays in this manual are shown as black-on-white. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “REFERENCE” section.
PAGE 2
072-2 DAY COUNTER MODE FILE MODE The Day Counter Mode lets you count the number of days from the Timekeeping Mode’s current date to a specific target date. An indicator flashes on the display when the target date is reached. • There are 10 Day Counter records, each of which can be set with its own title and target date. • A Day Counter record has a title field, a target date field, and a day counter field.
PAGE 3
2072-3 REFERENCE This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. CITY CODE TABLE City Code City GMT differential Display Text ADL ADELAIDE +9.5 Up to four characters of Day Counter Mode title and File Mode memo text can be shown on the display. Up to six digits of numeric data can be shown in the File Mode.