User manual

1588-2
TIME SETTING MODE
To set the time and date
1. Use C to enter the Time Setting Mode.
• The seconds digits flash, because they are
selected .
2. Press A to change the selection in the following se-
quence.
3. While the seconds digits are selected (flashing), press B to reset the seconds to
00.
If you press B while the seconds count is in the range of 30 to 59, the seconds are
reset to
00 and 1 is added to the minutes. If the seconds count is in the range of 00
to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press B to increase
the number. While the day of the week is selected, pressing B advances to the next
day. Holding down B changes the current selection at high speed.
5. After you set the time and date, press C to return to the Timekeeping Mode.
• The watch does not make any allowance for leap years. Be sure to manually set Feb-
ruary 29 for the appropriate day of the week.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
A
C
B
E
D
PM
Date
Day of week
PM indicator
Hour : Minutes Seconds
Seconds
Hour
Minutes
Day of Week Date
Month
Important!
Keep the watch about 5cm (2 inches) from your
mouth when recording!