User manual

ManualsBrandsCasio ManualsWatch1382

1382-4

Current time

Mode indicator

DST

DST indicator

DST On/Off Hour Minutes

How time is kept in the World Time Mode

When you set the time for any time zone, all other zones are adjusted

accordingly. The World Time Mode time setting can be made manually or by

Auto Receive of the time calibration signal. When Auto Receive is turned on

in the Timekeeping Mode, successful receipt of the time calibration signal

causes all World Time Mode times to be adjusted in accordance with Berlin

time.

The manual time setting procedure can also be used to turn daylight saving

time (DST) on and off. When daylight saving time is turned on, time settings

are automatically advanced one hour.

• With daylight saving time, clocks are set one hour later in order to better

take advantage of daylight hours during the summer, when days are longer.

Whether or not daylight saving time is used depends on the country you are

in.

• See “TIME CALIBRATION SIGNAL RECEPTION” for details on automatic

time signal reception.

To set the World Time manually

1. In the World Time Mode, press A or D to

scroll through the time zones and find the

one you want.

2. Press B and the DST On/Off setting

flashes on the display because it is

selected

• The DST indicator flashes along with the

current on/ off setting.

3. Press C to change the selection in the following sequence.

4. While DST On/Off setting is selected (flashing), press D toggle Daylight

Saving Time on (

On) and off (OFF). While the hour or minutes digits are

selected, press D to increase the setting and A to decrease it.

• Holding down either button while the hour or minutes digits are selected

changes the setting at high speed.

• The 12-hour/24-hour format of the World Time matches the format you

select in the Timekeeping Mode.

5. After you set the time, press B to return to the World Time Mode.

To switch between standard time and daylight saving

time

1. In the World Time Mode, use A or D to display the time zone whose

standard/daylight saving time setting you want to change.

• You can make separate daylight saving time settings for each individual city.

2. Press B and the DST On/Off setting flashes on the display because it is

selected

• The DST indicator flashes along with the current on/ off setting.

3. Press D toggle Daylight Saving Time on (

On) and off (OFF).

4. After you are finished making the setting you want, press B to return to

the World Time Mode.

• The DST indicator is on the display whenever you display a city for which

daylight saving time is turned on.

ALARM MODE

When the Daily Alarm is turned on, the alarm

sounds for 20 seconds at the preset time each

day. Press any button to stop the alarm after it

starts to sound.

When the Hourly Time Signal is on, the watch

beeps every hour on the hour.

• If you do not operate any button for a few

minutes while in the Alarm Mode, the watch

automatically goes back to the Timekeeping

Mode.

To set the alarm time

1. Press B while in the Alarm Mode. The hour digits flash on the display

because they are

selected

• This operation will turn the Daily Alarm on automatically.

2. Press C to change the selection in the following sequence.

Hour Minutes

3. Press D to increase the selected digits or A to decrease them. Holding

down either button changes the selection at high speed.

• The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the

time correctly as morning (no indicator) or afternoon (P).

4. After you set the alarm time, press B to return to the Alarm Mode.

Hourly time signal on indicator

Alarm on indicator

Hour : Minutes

Mode indicator

[Alarm ON Indicator/Hourly Time Signal ON Indicator]

Both ON Both OFF Daily Alarm

Only

Hourly Time

Signal only

To turn the Daily Alarm and Hourly Time Signal on and

off

Press D while in the Alarm Mode to change the status of the Daily Alarm and

Hourly Time Signal in the following sequence.

To test the alarm

Hold down A while in the Alarm Mode to sound the alarm.

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed

time, split times, and two finishes. The range

of the stopwatch is 23 hours, 59 minutes, 59.99

seconds.

HAND SETTING MODE

Use the following procedure to correct the ana-

log time whenever it does not match the digital

time.

• If you do not operate any button for a few

minutes while in the Hand Setting Mode, the

watch automatically goes back to the

Timekeeping Mode.

To set the analog time

1. Press B while in the Hand Setting Mode,

and the mode indicator will start to flash on

the display.

2. Press D to move the hands of the analog timepiece forward or A to

move them back.

• Holding down either button moves the hands at high speed.

3. After you set the analog time, press B to return to the Hand Setting Mode.

ABOUT THE DIGITAL DISPLAY AREA

If the figures in the digital display area seem to

be continually changing, hold down C for about

three seconds until you hear the watch beep.

At this time the watch should return to the

Timekeeping Mode.

Mode indicator

1/100 second

Hours

Minutes

Seconds

(a) Elapsed time measurement

(b) Split time measurement

▼

DDDDA

StopRe-start ClearStart Stop

▼

DA A D A

Start Split Split release Stop Clear

▼

ADDAA

Start Split releaseStopSplit Clear

First runner

finishes.

Second runner finishes.

Record time of first runner.

Record time of

second runner.