User Manual

EN-60
Recording and Playback
5. Touch “ Y W” to return to the beginning of the
song, or use “
s” and “d” to adjust the
position to start playback.
6. Touch “0” to enter the recording mode and
select the track where you want to perform
punch-in recording.
• For information about how to select a track, see steps
4 and 5 under “To record to a specific track (Part)”
(page EN-57).
7. Touch “Rec Type”.
8. Touch “Punch In A-B”.
9. Touch “X”.
• Punch-in recording automatically starts when
playback reaches the start point and ends when it
reaches the end point you specified in step 3.
* When you start playing, various mixer settings are
recorded to the MIDI data header as header
information.
Rewritten Information
1. On the MENU screen, touch “MIDI
RECORDER”.
This displays the MIDI RECORDER screen.
2. Touch the name of the MIDI data file that
contains the header information you want to
rewrite.
3. On the MENU screen, touch “MIXER”.
This displays the MIXER screen.
4. Select a part and then change the parameter
settings you want.
• Repeat step as required to rewrite other parameters.
5. After all of the parameters are the way you
want, hold down the dk STORE button as
you press the 4 MIDI a button.
The message “Complete!” will appear when rewriting
of the MIDI data header information is complete.
You can use the procedure below to perform auto play
of MIDI data (MIDI recording data or SMF files) stored
in Digital Piano memory or on a USB flash drive, and
practice along on the keyboard.
• For information about loading a USB flash drive on
the Digital Piano and importing MIDI data to Digital
Piano memory, see “Loading Data from a USB Flash
Drive to Digital Piano Memory” (page EN-85).
1. On the MENU screen, touch “MIDI
RECORDER”.
This displays a MIDI RECORDER screen.
2. Touch the file name.
3. Touch the “User” tab to play back MIDI data
stored in Digital Piano memory or the “Media”
tab to play back from a USB flash drive.
4. Touch the MIDI data you want to play.
5. Touch “X”.
This starts playback.
• You can also start playback by pressing the 4 MIDI
a button.
• The operations below are supported while MIDI data
is playing back, during playback standby, or while
playback is paused.
To rewrite MIDI data header information*
Parts : System track (Port B parts 1 to 5), Tracks 01 to 16
(Port C parts 1 to 16)
Parameters : Tone, Volume, Pan, Coarse Tune, Fine
Tune, Bend Range, Reverb Send, Chorus
Send, Delay Send
To play MIDI data
This icon: Does this:
Performs repeat play.
Y W Returns to the beginning of a song.
s Rewinds. A single touch rewinds one
measure, holding down performs
continuous rewind.
d Fast forwards. A single touch fast
forwards one measure, holding down
performs continuous fast forward.
k Pauses or resumes the currently playing
MIDI data.
The icon flashes while playback is
paused.
a Starts playback MIDI data or stops
playback.
0 Toggles between the recording mode and
playback mode.
B
PX560-ES-1B.indd 62 2016/12/15 15:39:34