User Guide

E-34

3
To change an alarm time setting, hold down A for about two seconds until
the hour digits of the current alarm time start to flash.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hour digits will flash.

4
Each press of C causes the flashing to move between the hour and the
minutes digits.
The flashing digits are the ones that are selected.

5
Use B and D to change the flashing setting, and set the hour and minutes
you want.
• Holding down either button scrolls the setting at high speed.
• If you are using 12-hour timekeeping, the PM indicator will appear for times
between noon and 11:59 p.m.