User Manual

E-51
Using CF Card Extension Unit (HA-D94CFU2)
The CF Card Extension Unit (HA-D94CFU2) is an add-on option available for the IT-600.
This unit supports CF Type I and Type II cards.
The CF Card Extension Unit comes with the following items.
CF Card Extension Unit Specifications
Model: HA-D94CFU2
CF card slot: CompactFlash Type I and Type II cards (3.3 volt)
Output: 3.3 ± 0.165 V, Max. 1.0 A
Dimensions:
Approximately 76(W) × 79(D) × 16(H) mm (3"W × 3
1
⁄
8
"D ×
5
⁄
8
"H)
Weight: Approximately 45g (1.6oz)
Attaching the Unit
Attach the CF Card Extension Unit (hereafter referred to as “the unit” in this
instruction) on the IT-600 as described below.
1.Check if the power on the IT-600 is off. If it is not, press the Power key to turn it off.
2.Turn the IT-600 upside down.
3.Loosen the screw in the expansion port cover and remove the cover.
4.Plug in the connector of the unit to the socket on the IT-600.
• CF Card Extension Unit • Cover • Screws (4 pcs)
• Cushion pad (1 pc)