User's Manual

E-67

SD memory card can be installed in the SD Memory Card slot on the Handheld Printer

Terminal. Insert (or remove) an SD memory card according to the procedure described

below.

Inserting an SD Memory Card

1. Open the cover of the SD memory

card slot ( ) and insert an SD

memory card all the way in until the

top of the SD memory card aligns

with the entrance of the slot of the

Handheld Printer Terminal ( ).

2. Close the cover of the SD memory card slot.

Important!

•

If you rewrite content in SD memory card using PC or other device, the content may

not be interoperable with application run on IT-3100. If you ever rewrite content in

SD memory card using other device, be sure to perform a full reset by pushing the

reset switch on the back of the IT-3100 before the use of SD memory card

(Pushing the reset switch on IT-3100 turns on the power automatically.)

• Never turn off the power or remove an SD memory card from the slot while the

card is being accessed. Doing so can damage the SD memory card or data in the

card.

Removing an SD Memory Card

1. Open the cover of the SD memory

card slot and press on the SD memory

card ( ). The SD memory card is

pushed out ( ).

2. Pull out the SD memory card and close the cover of the SD memory card slot.

Using SD Memory Cards