User's Manual

E-63
4. Insert a PC card having PC card removal
tape attached. Insert the PC card all the
way in with the top of the card facing
towards the top of the Handheld Printer
Terminal.
Fold up the end of the PC card removal
tape so that it does not get caught in the
way when closing the cover.
5. Attach the PC Card Holder to lock the
end of the PC card and prevent it from
coming out due to impacts and so forth.
Decide on the type of PC Card Holder
Fixer (three types are available) and the
orientation and attachment position of
the holder according to the location of
the end of the PC card.
6. Close the cover (PC card slot cover) and
fasten with the two screws.
Important!
• If you rewrite content in PC card using PC or other device, the content may not be
interoperable with application run on IT-3100. If you ever rewrite content in PC
card using other device, be sure to perform a full reset by pushing the reset switch on
the back of the IT-3100 before the use of PC card.
(Pushing the reset switch on IT-3100 turns on the power automatically.)
• Never turn off the power or remove a PC card from the slot while the card is being
accessed. Doing so can damage the PC card or data in the card.