User's Manual

30
Attaching and Removing the Battery Pack
Attaching
1.
Turn the Rugged PDA over. slide the battery pack cover lock
switches with the end of the stylus to FREE (
q
), and remove
the battery pack cover.
2.
Align the battery pack with the slot and insert it into the slot (
w
).
Next, reattach the battery pack cover, and slide the lock switch
from FREE to LOCK (
e
).
•
Be sure to slide the battery pack cover lock switch to the
LOCK position. If it is not attached correctly, it may fall out
while you are carrying the Rugged PDA and cause a mal-
function or injury.
wInsert battery pack
eFREE→LOCK
qLOCK→FREE
DT-101章/21-35.p65 04.9.30, 17:27Page 30 AdobePageMaker6.5J/PPC