User's Manual

E-50
Configuring Home Time Settings
1. In the Timekeeping Mode, hold down the
A button for about two seconds until
the seconds digits of the current time
start to flash. This is the setting screen.
2. Configure the Home Time settings as
shown below.
Use the D button to move to the next
setting. Use the E (+) and B ()
buttons to change the currently
selected setting.
Holding down the E or B button
changes the current setting at high
speed.
3. After all the settings are the way you
want, press the A button to exit the
setting screen.
The watch also will exit the setting
screen automatically if you do not
perform any operation for about two or
three minutes.
00 Reset/Illumination Duration
00 Reset: Press the E button.
00 to 29, no change in minutes.
30 to 59, increases minutes by 1.
Illumination Duration: Press the B button.
Switches between 1.5 seconds and 3
seconds.
Current setting indicated in the upper
display.
(2 seconds)
1.5 seconds
3 seconds
D
theとbutton
入れました。