User's Manual
Table Of Contents
- Accessories
- Read this first!
- Contents
- General Guide
- Monitor Screen Contents and How to Change Them
- Quick Start Basics
- What you can do with your CASIO camera
- Using the Attachment
- Using the Touch Panel
- First, charge the battery prior to use.
- Turning Power On and Off
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Shooting a Snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Recording Images
- Advanced Recording Settings
- Using the REC Menu
- Shooting by Touching the Monitor Screen (Touch Shooting)
- Movie Image Quality Settings (Movie Quality)
- Reducing Blur Due to Camera Movement During Movie Recording (Movie Anti Shake)
- Shooting a Burst of Images (High Speed CS)
- Correcting Image Brightness (Brightness)
- Adjusting White Balance (White Balance)
- Specifying ISO Sensitivity (ISO)
- Self-shooting (Mirror Image)
- Reducing Wind Noise during Movie Recording (Wind Noise Cut)
- Turning on Image Review (Review)
- Saving an Additional Full View Version of an Image (Double Save)
- Using the REC Menu
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Connecting the Camera with a Smartphone (Wireless Connection)
- Controlling Your Camera with a Smartphone
- Using a Wireless Mode
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Configuring Wireless Connection Settings
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Specifying Images to be Sent by Auto Send (Auto Send File Settings)
- Resizing Snapshots before Sending Them to a Smartphone (Resize When Sending)
- Changing the Camera Password for Wireless LAN Connection (WLAN password)
- Unpairing the Camera from a Smartphone (Unpairing)
- Using Two Cameras at the Same Time (Multi Camera Mode)
- Printing
- Using the Camera with a Computer
- Other Settings (Set Up)
- Adjusting Monitor Screen Brightness (Screen)
- Selecting Display Information (Info)
- Locking the Camera or Controller Screen Orientation (Rotation Lock)
- Configuring Camera Sound Settings (Camera Sound)
- Using the Vibration Function (Vibration)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Style (Date Style)
- Specifying the Display Language (Language)
- Specifying the Controller Sleep State Trigger Time (Sleep)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Checking the Current Camera Firmware Version (Version)
- Registering a Second Camera (Multi Camera Mode)
- Appendix
27
Quick Start Basics
• The maximum range for shooting with the controller’s shutter button is around
10 meters (32.8'). The maximum range for viewing the image on the controller’s
monitor screen is around five meters (16.4').
• If the connection is poor, the controller operation lamp will flash green and
“ ” (Communication status between camera and controller) will appear on the
monitor screen. Camera response may be slow if you perform an operation on the
controller while communication conditions are bad. If this happens, try adjusting the
orientation and the distance between the camera and controller.
• Note the precautions below to ensure stable
communication between the camera and
controller.
– Make sure nothing is blocking the gray areas
as shown in the illustrations.
– Point the back of the controller at the
camera.
– Make sure there are no obstacles in the path
between the camera and controller.
Sleep Mode
If you press [p] (Power) on the controller or if you do not perform any controller
operation for the time specified by the “Sleep” setting on the Setup menu (page 106)
while there is a Bluetooth wireless technology connection between the camera and
controller, the camera and controller will enter a sleep state. The operation lamp
slowly flashes green while the camera is in the sleep mode. To restore the controller
display, press any controller button. A low-power Bluetooth wireless technology
connection between the camera and controller is maintained even while they are in
the sleep mode, so operation is quickly enabled when you are ready to use the
camera and controller.
• If the distance between the camera and controller becomes to great or if
communication conditions become bad while the camera is in the sleep mode, the
connection may be dropped between them.