User's Manual
Table Of Contents
- Accessories
- Read this first!
- Contents
- General Guide
- Monitor Screen Contents and How to Change Them
- Quick Start Basics
- Recording Images
- Advanced Recording Settings
- Recording Beautiful Portraits (Make-up)
- Using Touch Shutter (Touch Shutter)
- Changing the Image Size (Image Size)
- Specifying the Maximum Movie Recording Time (Max Recording Time)
- Shooting with Brightness Compensation (EV Shift)
- Adjusting Hue when Shooting (White Balance)
- Enabling Auto Rotation of Images to Match Camera Orientation (Auto Rotate)
- Viewing Snapshots and Movies
- Play Mode Screen
- Viewing Snapshots
- Viewing a Movie
- Deleting Snapshots and Movies
- Zooming an On-screen Image
- Viewing the Image Menu
- Rotating an Image (Rotation)
- Creating a Collage of a Day’s Snapshots (Highlight Photo)
- Creating a Movie of a Day’s Images (Highlight Movie)
- Changing the Highlight Score of an Image
- Connecting the Camera with a Smartphone (Wireless LAN)
- Other Settings (Set Up)
- Configuring Camera Sound Settings (Camera Sound)
- Using the Vibration Function (Vibration)
- Controller Startup Using a Flick Operation (Flick Start)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Style (Date Style)
- Specifying the Display Language (Language)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Printing
- Using the Camera with a Computer
- Appendix
58
Connecting the Camera with a Smartphone (Wireless
LAN)
Use the procedure below to establish a wireless LAN connection between the camera
and a smartphone for the first time. This operation is required for the first connection
only.
1. If the camera is on, hold down [p] (Power) to turn it off.
2. On the camera, hold down [0] (Movie) as you hold down [p] (Power)
until the camera’s operation lamp flashes green.
This will enable connection with a smartphone.
• While the camera is connected with a smartphone, its shutter button and [
0]
(Movie) button are disabled.
3. For the smartphone Wi-Fi setting, input the camera SSID and
password.
This will connect the smartphone to the camera, which is indicated by the
camera’s operation lamp lighting green.
• The initial default SSID and password settings are shown below.
SSID:
* * * *
Password:
* * * *
• The SSID and password can be changed from a smartphone that has the
EXILIM Link app installed.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
IMPORTANT!
• Note that the wireless LAN connection between the camera and smartphone is
maintained even while the EXILIM Link app is not running on the smartphone or
when the app is running in the background. Leaving a wireless LAN connection in
effect will shorten camera battery life and cause the camera to become warm. Shut
down the EXILIM Link app and turn off the camera to terminate the wireless LAN
connection whenever you are not using it.
• Terminating a wireless LAN connection will cause the camera to enter connection
standby. If no connection is established within three minutes, the camera will shut
off automatically.
Configuring Wireless LAN Settings