User's Manual

Table Of Contents
13
Quick Start Basics
. To use the hinge unit as a stand
. To change the shooting direction by 90 degrees
1. While pulling down on the camera’s [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
The white lines on the lens ring indicate the
horizontal orientation of the camera.
. To remove the hinge unit from the camera
1. While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
2. Remove the hinge unit from the camera.
Hinge Unit
White lines
A
[FREE] lever