User's Manual
83
Connecting the Camera with a Smartphone
(Wireless Connection)
(Wireless) Wireless settings Auto Send
While On is selected for this setting, images are sent to the paired smartphone
automatically. Images are sent to the smartphone while the camera is in the sleep
mode. If there is no wireless connection between the camera and smartphone, the
images will be sent as soon as a connection is established.
Auto Send cannot be enabled unless the camera is paired with a smartphone
(page 77).
Auto Send can be used only with a smartphone that supports Bluetooth Smart.
Both a Bluetooth and wireless LAN connection are required between the camera
and smartphone to auto send camera images.
The icons below are displayed on the camera screen while the camera and
smartphone are connected.
Wireless LAN connection:
Bluetooth wireless technology connection:
You can specify the size of the image sent to the smartphone using Resize When
Sending (page 84).
You can use the smartphone apps below to view snapshots after sending them.
iPhone: Camera Roll
Android terminal: Gallery, Photo, or another photo browser app
Images shot while the Auto Send setting is On will be sent to the smartphone,
even if the Auto Send setting is changed to Off before they are sent.
When On is selected for Auto Send, a message will appear whenever you try to
delete a file or turn off the camera.
If you try to turn off the camera while there are unsent images in memory, a
message will appear to alert you. If you want the images to be sent, leave the
camera on until the send operation is complete. Pressing [] (Power) again will
turn off the camera.
Note that if the connection between the camera and smartphone is lost while there
are unsent images in memory, the camera will turn off after about three minutes. In
this case, the camera will try to send the images again after it is turned back on.
Sending Images from the Camera to a Smartphone as They are
Recorded (Auto Send)