User's Manual

Connecting the Camera with a Smartphone

(Wireless Connection)

3. When the password is the way you want, touch OK.



 Changing the wireless LAN password will terminate the connection with the

smartphone. To reconnect with the smartphone, configure wireless connection

settings (page 77). If your smartphone does not support Bluetooth Smart, perform

the operations below to change your smartphones Wi-Fi settings.

 iPhone:

Tap the right arrow of the field where the SSID of the camera is displayed in the

Wi-Fi settings to delete network settings. After deleting, select the camera SSID

again and input the new password.

 Android terminal:

Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and

select Forget. Select the camera SSID again and input the new password.

  (Wireless)  Wireless settings  Unpairing

Unpairs the camera from a smartphone.

To use the camera with a different smartphone, first unpair it from the current

smartphone.



 When unpairing, be sure also to perform the unpairing operation on the

smartphone as well. For details, refer to the EXILIM Connect Users Guide (page

74).

 Unpairing the camera from a smartphone will result in all pending unsent images to

remain unsent.

Unpairing the Camera from a Smartphone (Unpairing)