User's Manual

27
Quick Start Basics
Sleep Mode
If you press [] (Power) on the controller or if you do not perform any controller
operation for the time specified by the Sleep setting on the Setup menu (page 99)
while there is a Bluetooth wireless technology connection between the camera and
controller, the controller and camera will enter a sleep state. The operation lamp
slowly flashes green while the camera is in the sleep mode. To restore the controller
display, press any controller button. The Bluetooth wireless technology connection
between the camera and controller is maintained even while they are in the sleep
mode, so they can quickly recover when you press a button.
 If the distance between the camera and controller becomes to great or if
communication conditions become bad while the camera is in the sleep mode, the
connection may be dropped between them.