User's Manual
15
Quick Start Basics
To use the hinge unit as a stand
To change the shooting direction by 90 degrees
1. While pulling down on the cameras [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
Align the cameras operation lamp with the C
mark on the hinge unit.
The indentations in the lens ring indicate the
orientation of the long dimension of the image
being shot.
To remove the hinge unit from the camera
1. While pulling down on the cameras [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
Hinge Unit
Lens ring
[FREE] lever
Indentations
A B C
A
[FREE] lever