User's Guide

Using a Computer

Depending on the performance of your Macintosh computer, you may not be able to

successfully view or save still images and videos on your computer.

IMPORTANT!

• Do not disconnect the cable or operate the camera while viewing or saving images.

Doing so could cause file corruption.

NOTE

• You can also import images directly from a memory card using a third-party card

reader or the card slot on the computer. Refer to the manual for your device for

details.

. Connecting the camera to a computer to save files

1. Switch off the camera and connect it to a USB port on the computer

using a micro USB cable (page 55).

• The computer used should be compliant with the IEC/UL/CSA/EN60950-1 or

JIS C 6950-1, or with the VCCI-B, FCC-B or CE standard.

• The computer should be kept at least 1.5 m (4.9') away from the patient during

use.

A micro USB cable is not included with this camera.

The micro USB cable should only be connected to the camera to save data to a

PC.

Using a Macintosh Computer

Saving and viewing images on a Macintosh computer

Do not use a computer to manipulate images in built-in memory or on

memory cards, including modifying, deleting, moving or renaming the

images.

Doing so causes inconsistencies with the image management data and may

prevent images being played back on the camera or radically alter the number of

images shot. Operations such as image modification, deletion, relocation and

renaming should be carried out on images saved on the computer.