User's Guide

Connecting the Camera to a Computer

(Wi-Fi connection)

. Wi-Fi connection via STATION mode

1. Tap (recall) on the left side of screen.

2. Tap (Setting).

3. Tap “Wi-Fi”.

4. Set “Wi-Fi” to “ON”.

5. In “Wi-Fi Mode”, select “STATION”.

6. Tap “SSID”.

7. In the STATION MODE screen, select the

SSID you want to connect to.

If the desired SSID is shown

1) Select the SSID for the router you want to

connect to and enter the password for the router.

2) Tap .

If the desired SSID is not shown

If the stealth settings are enabled, SSIDs are not shown. Check the router

settings and then use the procedure below to configure the settings.

1) Tap “+Add Network”.

2) Enter the SSID.

3) Select the router authentication method.

4) Select the router IP address setting.

5) Tap .

The added SSID appears in the STATION MODE screen.

Refer to the website below for information on the procedure on your computer.

https://support.casio.com/en/support/download.php?cid=033&pid=2822

None If no password is set

WEP For the WEP method

WPA/WPA2 PSK For the WPA PSK/WPA2 PSK method

DHCP To allocate IP addresses automatically

Static

To enter the IP address manually

Input details: Static IP address, gateway address,

network prefix length

SSID

Wi-Fi

ONOFF

Wi-Fi

Wi-Fi Mode

PSTATION

abcdefghijk_G

STATION MODE

abcdefghijk_A

+ Add Network