User's Guide

Photography

You can apply protective film (DFP-100M (sold separately)) to the camera lens to

protect it against scratches and soiling.

• Before using the protective film, carefully read the "Notes on Using this Product"

provided with the film to ensure that you use it correctly.

1. Apply the protective film to the camera.

Remove the backing paper from the protective film and apply the film to the lens.

When using the protective film, peel off the blue sheet on the surface of the film.

2. Set the recording mode to “ DERMO CONT” or “ DERMO”.

3. Place the protective film directly onto the

affected area and press the shutter button

down halfway to focus the image.

4. With the camera fixed in place, press the

shutter button down fully.

• A close-up still image is photographed.

• You can also take photos by tapping .

5. Peel off the protective film.

Once you have finished taking photos, peel the protective film off the camera

lens.

This is a single-use product only and cannot be re-used.

Applying Protective Film to Take Photos

Protective film

Lens