User's Guide

2
The Dermocamera DZ-D100 is a camera intended to capture high quality
dermoscopic images.
Rx only
Image data captured from the lens is converted to electrical signals by a CMOS
imaging element inside the camera and displayed as an image on the camera’s LCD
monitor.
The operator composes the image to be photographed while viewing the image
shown on the LCD monitor and takes the photograph by pressing the shutter button.
The image captured by the CMOS imaging element is converted to electrical signals
and the photographed image is saved onto a memory card.
The special lens built into the camera allows the subject to be photographed at a
distance, in the same way as a conventional digital camera, and also allows subjects
such as skin lesions to be photographed by placing the lens directly onto the skin.
Such close-up shots are taken using illumination from an LED light inside the lens.
Because the LED light used for illumination is fitted with a polarizing filter, the
operator can switch between polarized and non-polarized lighting.
This camera can be used to photograph the skin in close-up or at a distance. Close-
up shots of the skin are taken using illumination from an LED light inside the lens.
Shots taken at a distance can also be illuminated using the ring light around the
outside of the lens. This camera allows you to use the same camera to record both
enlarged images of a skin lesion and overall images of the area containing the lesion.
The LED light in this camera can be switched between polarized and non-polarized,
allowing you to photograph images of both the dermis and the epidermis with a single
press of the shutter button.
Indications for Use
Operating Principle
Intended Purpose and Effects
E