User's Guide

17
Introduction (Basic Operation)
2. Insert the memory card.
Hold the memory card with the back
side uppermost (towards the LCD
monitor) and push it into the memory
card slot until you hear a click.
3. Close the battery cover.
IMPORTANT!
• Do not insert anything other than designated memory cards (page 16) into the
memory card slot.
• If any foreign object or moisture gets into the memory card slot, switch the camera
off and remove the battery. Then refer to the contact information in “Inquiries
Regarding Repairs”.
Replacing the memory card
Pressing the memory card causes it to pop
out slightly. Pull it out and insert another
memory card.
IMPORTANT!
• Switch the camera off before replacing the
memory card.
• When you have pressed [p] (Power) to
switch the camera off, do not remove the
memory card while the operation check
indicator is flashing green. Doing so could
result in photographed images not being recorded or the memory card being
damaged.
Front Back
Back
Operation check indicator
B