User's Manual

E-74
3. Attach the Dry-cell Battery Case Cover to the DT-X7.
Removing
1. Remove the Dry-cell Battery Case Cover from the DT-X7, as shown in the
illustration.
Specifi cations
Power Source: Dry-cell size AAA alkaline batteries x 4pcs
Output: 4.7V DC
Battery Life: Approximately 5 hours*
Dimensions:
Approximately 37(W)
u
56(D)
u
23(H) mm
(1
e

"W
u
2
e

"D
u
e
"H)
Weight: Approximately 15g (0.5oz) (not including dry-cell batteries)
under the conditions that backlight’s brightness is set to 5th grade and the ratio of cyclic
operation of “Standby, Key input, and Scanning” is set at 10:1:1.
Important!
When dry-cell alkaline batteries are used, the following must be noted:
WLAN communication, vibrator, and charging batteries are not operable
Other functional limitations are as follows.
CPU speed is set at 104 MHz
Backlight’s brightness is reduced to 50%
*