User's Manual

E-70
3. Thread the looped cord on the end of the Hand Belt through one of the strap holes at
the bottom of the DT-X7. (You can use either hole.)
Strapholes
4. Feed the belt through the wire loop on the mount, fold it back and secure it with the
Velcro fastener.
Wireloop
Important!
When inserting the DT-X7 with the Hand Belt attached into the USB Cradle, etc.,
check the Power LED on the cradle and the indicator on the DT-X7 to ensure that the
DT-X7 is inserted securely.
The DT-X7 must be inserted correctly to charge and communicate successfully.
•