User's Manual

E-28
Setup
Using the mouse emulator function
The mouse emulator function lets you make settings and adjustments by using a mouse
cursor.
To use this function, activate it as follows.
■
Activating the mouse emulator function
While no mouse cursor is shown on the screen, press the “Fn” key followed by the
“4” key. The mouse cursor appears, and the mouse emulator function is now active.
To turn off the function, press the same key sequence again, i.e. “Fn” key
➝
“4” key.
Each push of this key sequence toggles the function between on and off.
■
Using the mouse cursor
Activate the mouse emulator function as described above.
Mouse cursor movement
Press the numeric key for the direction in which you want to move the mouse
cursor.
Mouse cursor moves
in the arrow direction.
* Holding down a key moves
the mouse cursor continuously.
Left click
This serves for selecting a fi le, making a menu selection, or a similar action.
Move the mouse cursor to the position where you want to click, and press the “5”
key.
Right click (calling up a menu)
Move the mouse cursor to the position where you want to click, and press the
Trigger R key.
•
*
*
•
•
•