User's Manual

E-26

Loading the large-capacity battery pack into the Handheld Terminal

After loading the large-capacity battery pack, you need to use the special large-capacity

battery pack cover in place of the standard battery pack cover.

“Loading and Removing” of the large-capacity battery pack cover are the same as those

for the standard battery pack cover.

Important!

When removing the battery pack, make sure you do not leave the Handheld

Terminal without a battery pack for more than about 10 minutes. Doing so can

cause data in the memory to be deleted.

When removing the battery pack, be sure you carefully follow the proper

procedure as explained in this guide.

Never try to use other type of battery than the ones that are speciﬁ ed for this

product.

When removing the battery pack, pull the removal tape straight up and remove

the battery pack. Removing with excessive force can damage the battery pack.

Before starting to use the DT-X7, verify that the battery pack cover is properly

closed.