User's Manual
E-45
Connecting the Cradle-type Battery Charger AC Adapter and
Mounting the Power PC Terminal
Use the special AC adapter that comes with the Cradle-type Battery Charger to connect
to a power source.
1. After making sure that the Cradle-type Battery Charger power switch is turned off,
plug the AC adaptor into the AC adapter jack on the back of the cradle.
2. Next, plug the AC adapter into a power outlet.
3. Turn on power. This causes the Cradle-type Battery Charger power indicator lamp to
light red.
POWER DATA LINE
4. Making sure that their power contacts come into contact with each other, place the
Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-
type Battery Charger power indicator lamp to light green.
The indicator on the Handheld Terminal changes from red to green when charging is
complete.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage the Cradle-type Battery Charger.
Power switch (OFF)
Power contacts
Power switch (ON)
Power Indicator Lamp