User Manual

IOM-CA5/SA5

NOTE: If ﬂ ang es do not come to geth er equal ly,

the upper di a phragm pres sure plate (8) may

be off-center. Remove spring cham ber (4) and

reposition upper di a phragm pres sure plate

(8) until the spring chamber (4) comes down

evenly on all sides.

11. Install all ﬂ ange bolts (12) and nuts (11) with

nameplate (99) located under one bolt head.

Hand-tighten nuts (11).

12. Evenly tighten body bolting (11,12) using an

alternating cross pattern in one revolution

increments. Tighten all bolts to 30-35 Ft-lbs

(41-47 Nm).