How to Guide

A Division of Reliance Worldwide Corporation
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
Specifications & Sales Sheet • Issue Date March 2014 • Last Revision March 2017
Heatguard
®
110-D Series–Lead Free
TYPICAL INSTALLATION
Domestic hot water distribution. To control water temperature at the source of heat (water
heater) or individual/multiple point-of-use fixtures (sinks, lavatories, or bath tubs) to provide a
safe distribution temperature . It can also be installed at gang shower applications where the
bather has no access to the temperature adjustment means.
Heatguard® 110-D LF
ASSE 1017, ASSE 1069, ASSE 1070, CSA B125.3
Tempered Water
120°F (49°C)
Dishwasher
Hot
Water
Water Heater
Set to
140°F (60°C)
Cold
Water
Supply
SPECIFICATION DATA
Performance:
Outlet temperature range 85 – 130°F (29 – 54°C)
Factory set and locked 120°F (49°C)
Temp. hot supply 120 – 180°F (48.9 – 82.2°C)
Temp. cold supply 39 – 80°F (3.9 – 26.7°C)
Maximum pressure 230 psi (1600 kPa)
Flow rate, minimum 1 gpm (3.8 l/min)
Flow rate, maximum 20 gpm (76 l/min)
Materials:
Body DZR Brass
Seals EPDM
Springs Stainless Steel
Internal cap Brass
Piston Engineered Polymer
AVAILABLE CONNECTIONS
SharkBite 1/2" and 3/4"
CERTIFICATIONS
The Cash Acme Heatguard
®
110-D LF is certified to ASSE 1017, ASSE
1069, ASSE 1070, CSA B125.3, NSF 372, NSF/ANSI 61 and listed by
IAPMO and ASSE for use in accordance with U.S and Canadian plumbing
codes.
Note: Flow rate determined on a
Heatguard
®
110-D LF with ½” sweat fittings