How to Guide

Sales and Specifications Sheet · Issue Date May 2013 · Last Revision November 2017
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
Heatguard
®
160 Series–Lead Free
TYPICAL INSTALLATION
The Heatguard
®
160 is a high performance Thermostatic Mixing Valve designed to control the
water temperature to individual or multiple fixtures such as sinks, lavatories, or bath tubs to
reduce the risk of scalding and thermal shock. It can also be installed in gang shower
applications where the bather has no access to the temperature adjustment means.
SPECIFICATION DATA
Performance:
Adj. outlet temperature range 95 – 120°F (35 – 48.9°C)
Factory set temperature range 115 – 120°F (46.1 – 48.9°C)
Temp. hot supply 120 – 180°F (48.9 – 82.2°C)
Temp. cold supply 39 – 80°F (3.9 – 26.7°C)
Maximum pressure 145 psi (1000 kPa)
Flow rate, minimum 0.34 gpm (1.3 l/min)
Flow rate, maximum 11 gpm (42 l/min)
Materials:
Body DZR Brass
Seals EPDM
Springs Stainless Steel
Internal cap Brass
Piston Engineered Polymer
AVAILABLE CONNECTIONS
Sweat 1/2"
Barb (PEX) 1/2" and 3/4"
Threaded (NPT) 1/2"
CPVC 1/2" and 3/4"
SharkBite 1/2" and 3/4"
CERTIFICATIONS
The Cash Acme Heatguard
®
160 LF is certified to ASSE 1069, ASSE 1070, CSA
B125.3, NSF 372, NSF/ANSI 61, and listed by ASSE, CSA, and IAPMO for use in
accordance with U.S. and Canadian plumbing codes.