Brochure

Heatguard
®
800 Series
Thermostatic Master
Controller for Commercial
and Industrial Applications
Temperature Range: 95-150°F (35-66°C)
Max Pressure: 145 psi (1000 kPa)
Fast acting, high quality thermostatic elements that sense the outlet
temperature and react to maintain a stable delivery temperature
even under varying and extremely low ows. The adjusting handle
can be locked at a desired temperature. Each valve has integral
mounting feet to allow it to be securely xed to a wall or frame.
Complete with 4 in 1 service ttings on each inlet. Every valve
is factory tested. The Heatguard
®
Series features a range of six
high ow rate Thermostatic Mixing Valves that mix hot water with
cold water to deliver tempered water at a controlled temperature,
typically 120°F (49°C). Intended for installation in the plant room
of commercial and industrial facilities to distribute controlled
temperature water to the domestic hot water system of a whole
building or a section of a building.
*Lead Free version coming soon.
Heatguard
®
TAFR
Temperature Actuated
Flow Reducers
Thermal element senses high temperature water and reduces
ow to protect user. Device will only reset when water temperature
drops to a safe level. The Heatguard
®
TAFR is used for shower or
faucet spouts to act as a “hot water fuse” to reduce ow of water if it
reaches 120°F (49°C).
*Lead Free version coming soon.
Heatguard
®
145 LF
Mini Thermostatic Mixing
Valve for Point-Of-Use
Applications
Temperature Range: 95-118°F (35-48°C)
Flow Range: 0.34-5.8 gpm (1.3-22 l/min)
The 145 LF provides a stable operation at ow rates as low as 0.34
gpm (1.3 l/min) to as high as 5.8 gpm (22 l/min). The valve also reduces
the outlet ow to a trickle in the event of cold water supply failure. The
145 LF has inlet connections to suit a 3/8" exible hose connector or a
compression connection to 3/8" OD tube. Also available with cold water
bypass and elbow inner ttings. Compact design, easily ts under or
behind a single basin. Specically intended for use in conjunction with
individual faucets and electronic faucets.
Heatguard
®
160 LF
Thermostatic Mixing Valve
for Commercial Point-Of-Use
Applications
Temperature Range: 95-120°F (35-49°C)
Flow Range: 0.34-11 gpm (1.3-42 l/min)
“Next generation” thermostatic technology provides optimum water
temperature control. Long life and scale resistance ensured by use of
high quality engineering polymers and inherently scale resistant design.
Every valve is extensively factory tested. All valves now come with
integral check valves in inlets and are lead free. The Heatguard
®
160
is intended to control the water temperature to individual or multiple
xtures such as sinks, lavatories, or bath tubs to reduce the risk of
scalding and thermal shock. It can also be installed in gang shower
applications where the bather has no access to the temperature
adjustment means.
Reliance Worldwide USA
2727 Paces Ferry Road SE
Building Two, Suite 1800
Atlanta, GA 30339
1-877-700-4242 • Fax: [phone]
www.rwc.com
Reliance Worldwide Canada
74 Alex Avenue
Vaughan, Ontario, L4L 5X1
1-888-820-0120
www.rwc.ca
A Division of Reliance Worldwide Corporation