Brochure

Heatguard
®
110-D LF
Thermostatic Mixing Valve
for Domestic Applications
Temperature Range: 85-120ºF (29-49°C),
adjustable to 130ºF (54°C)
Flow Range: 1-20 gpm (3.8-76 l/min)
Delivers water at a maximum temperature throughout the system and
yields safer hot water from all outlets while aiding in preventing the
growth of Legionella bacteria in the water heater. Robust, low
complexity construction. Every valve is tested for performance
prior to shipping. All valves now come with integral check valves
in inlets and are lead free.
The Heatguard
®
110-D LF can be used to control water temperature at
the source of heat (water heater) or point-of-use (sinks, lavatories, or
bath tubs) to provide a safe distribution temperature.
Heatguard
®
110-HX LF
Thermostatic Mixing Valve
for Domestic Heating and
Radiant Applications
Temperature Range: 85-176ºF (29-80°C)
Flow Range: 1-16 gpm (3.8-76 l/min)
Outlet temperature range extending to 176°F (80°C), making it ideal
for application in heating systems. It also applies to any installation
requiring the delivery of reduced temperature hot water.
Heatguard
®
115 LF
Thermostatic Mixing Valve
for Large Domestic and
Standard Commercial
Potable Water, Radiant, and
Heating Applications.
Temperature Range: 85-176ºF (29-80°C)
Flow Range: 2.5-28 gpm (9.5-100 l/min)
The 115 LF offers the same reliable protection of the 110 LF, but on
a larger scale. The 115 LF incorporates a fast acting, high quality
thermostatic element that senses the outlet water temperature and
reacts to maintain a stable delivery temperature even under changing
ows or variations in supply temperatures. The valve also greatly
reduces the outlet ow in the event of a cold water supply failure. The
115 LF features an adjusting knob that can be locked at a desired
temperature. Alternatively it can function in an adjusting mode. The
Heatguard
®
115 LF is intended for installation at the water heater to
distribute controlled temperature water throughout a domestic hot
water system. The Heatguard
®
115 LF has an outlet temperature
range extending to 176°F (80°C), making it ideal for applications in
heating systems or in any installation requiring the delivery of reduced
temperature hot water.
Temperature Range: 90-130°F (32-54°C)
Flow Range: 1-20 gpm (3.8-76 l/min)
The Tank Booster Pro combines a Thermostatic Valve, a Flexible
Connector and a Water Heater Tee in one package. The thermostatic
valve is factory set at 120°F (49°C), but may be easily adjusted.
Designed for use in residential and commercial applications, the Tank
Booster Pro controls the temperature from the point of distribution. The
Tank Booster Pro safeguards against scalding and bacteria growth
while increasing hot water capacity by up to 50% and can decrease
potential heat loss in household systems by up to 20%.
NEW!
Getting More Hot Water
Thermostatic Mixing valves are the
Solution
When more hot water is needed, Cash Acme has an easy, cost
effective solution. Our Thermostatic Mixing Valves allow the existing
heater to store water at a high temperature that might otherwise
scald, while delivering it at a safe 120°F (49°C) or lower to all
outlets. This makes the effective heater capacity much greater–
typically 50% more gallons with electric heaters. And even more
than that with gas. As shown in the chart, when the temperature is
increased to 160°F (71°C) on a 30 gallon water heater, the effective
gallons available at 120°F (49°C) will be 46 to 57 gallons depending
on the cold water temperature. That’s as much as an 89% increase
in available hot water from the same water heater.
WHOLESALE - PROFESSIONAL MARKET
Packaged in wholesale white box with color label
Percentage Increase of Hot Water by Temp.
Cold Water Temp °F (°C)
Storage Temp °F (°C) 45 (7) 55 (13) 65 (18) 75 (24)
120 (49) 100% 100% 100% 100%
140 (60) 127 131 136 144
160 (71) 153 162 173 189
180 (82) 180 192 209 233
*Percentage increase compared to tank with water stored at 120°F (49°C)
(based on a 30 gallon water heater.)
TRIPLE LISTED!
ASSE 1017,
ASSE 1069 &
ASSE 1070.