How to Guide

Specifications: AC001 • Issue Date December 2007
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
EB-25 Pressure Regulator
TYPICAL INSTALLATION
The Cash Acme EB-25 comes supplied with a pre-adjusted pressure set at the
factory. Any adjustment to this pressure is easily accomplished by lifting the orange
adjustment cap and twisting. The orange adjustment cap can be rotated counter
clockwise to decrease pressure and clockwise to increase the pressure. The changes
in pressure setting will be visible on the numeric indicator. All pressure adjustments
can be made before or after the installation with great ease.
SPECIFICATION DATA
Performance:
Outlet pressure range………………………….. 20-90 psi
Maximum temperature………………………… 180°F
Maximum inlet pressure……………………….. 300 psi
Service…………………………………………... Water
Materials:
Body……………………………………………... Lead Free
1
Bronze or Stainless Steel
Spring Chamber………………………………... Nylon
Adjusting Spring………………………………... Steel (zinc plated)
Pressure Plate………………………………….. Steel (zinc plated)
Diaphragm………………………………………. EPDM
Body Seat……………………………………….. Polysulphone
Seat Disc………………………………………... EPDM
Piston……………………………………………. Stainless Steel
Strainer Screen…………………………………. Stainless steel
AVAILABLE CONNECTIONS
Threaded (NPT) Inlet & Outlet
2
………………………............. ¾” & 1”
Threaded (NPT) Union, Threaded (NPT)…………….............. ½”, ¾”, 1”, 1 ¼”, 1 ½” & 2”
Sweat Copper Union, Threaded (NPT)……………….............. ½”, ¾”, 1”, 1 ¼”, 1 ½” & 2”
Threaded (NPT) Union Inlet & Outlet
2
………………............. ¾”, 1”, 1 ¼”, 1 ½” & 2”
Sweat Copper Union Inlet & Outlet
3
…………………............. ¾”, 1”, 1 ¼”, 1 ½” & 2”
PEX Barb Union Inlet & Outlet
3
……………………………….. ¾” & 1”
Union SharkBite
®
Connection Inlet & Outlet
3
....……………..... ¾” & 1”
CERTIFICATIONS
Cash Acme Type EB-25 Pressure Regulators are certified to ASSE 1003 and CSA
B356 and are listed by ASSE and IAPMO (cUPC). The EB-25 Pressure Regulator is
compliant with NSF 372.
1
For lead free models, surfaces that are in contact with
consumable water contain less than 0.25% lead by
weight.
2
The ¾” and 1” models are stainless steel. For more
information see the EB25 Stainless Steel spec sheet.
3
The ¾” and 1” models use a stainless steel body and
lead free brass tailpieces