Specification

Specifications: AA001 • Issue Date April 2008
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
E-3 Pressure Regulating Valve
DESCRIPTION
The Cash Acme E-3 Pressure Regulating Valve automatically reduces a high inlet pressure to
a lower delivery pressure and maintains the lower pressure within acceptable limits. It provides
substantially higher capacity and closer regulation for more demanding and higher quality
installations. The E-3 incorporates a yoke-type design, allowing the regulator to close against
the inlet pressure and provide quieter operation under wide and varying flow conditions.
The E-3 is designed for use where supply line inlet pressure does not exceed 300 psi and is
suitable for either cold or hot (to 180°F) water service for a variety of applications. Standard
factory outlet setting is 45 psi, but other settings are available.
FEATURES AND BENEFITS
Automatically reduces a high inlet pressure to a lower delivery pressure:
Maintains a lower pressure within reasonably close limits.
Every valve is tested for performance prior to shipping:
Specify and install with confidence!
Solves problems of water hammer, pipe noise and rapid wearing of fixtures, faucets and
valves:
Longer life of the valve saves money and time!
Rugged bronze body:
Superior reliability and improved user safety.
Listed by ASSE 1003 and IAPMO:
Inspector friendly for peace of mind.
Every valve is tested for performance prior to shipping:
Specify and install with confidence.
Assembled and tested in the USA:
Prepared in our manufacturing plant in Cullman, Alabama.
SPECIFICATION
A pressure regulating valve shall be installed to reduce high supplies of incoming water
pressure. The valve shall be ASSE 1003 and IAPMO listed. The valve shall have a bronze
body and a maximum inlet pressure of 300 psi. The valve shall have a separate cleanout plug
that houses a Stainless Steel or Monel strainer screen. The valve shall be a yoke-type design
with a buna seat disc and a stainless steel body seat. The valve shall be a Cash Acme E-3
Pressure Regulating Valve.