Specifications

Remote-Control CommandsGPS and Assisted GPS
104Operating Manual 1171.5248.12 ─ 15
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:AZER 10000
sets the value of the UTC parameter A
0
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:BETA<ch0> <Beta>
Sets the parameter beta_0, beta_1, beta_2 and beta_3 of the satellite's navigation mes-
sage.
As this parameter affects the ionospheric model used, the value selected here also has
an impact on the satellite's parameters "Time Shift", "Doppler Shift" and "Duration (Ele-
vation>10°)".
The value of these parameters will be updated automatically.
Suffix:
<ch0>
.
0|1|2|3
Parameters:
<Beta> float
Range: -128 to 127
*RST: 0
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:BETA1 100
sets the value of the ionospheric parameter beta_1
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:CIC <Cic>
Sets the parameter Amplitude of the Cosine Harmonic Correction Term to the Angle of
Inclination of the satellite's navigation message.
As this parameter affects the satellite's orbit, the value selected here also has an impact
on the satellite's parameters "Time Shift", "Doppler Shift" and "Duration (Eleva-
tion>10°)".
The value of these parameters will be updated automatically.
Parameters:
<Cic> float
Range: -32768 to 32767
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:CIC 100
sets the value of the parameter C_ic
Options: R&S SMx/AMU-K65
Navigation Message Configuration