Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 77
CALCulate<1|2>:MARKer1:FUNCtion ZOOM <Boolean>
This command zooms the trace by the specified numeric level around marker 1.
Example
CALC1:MARK1:FUNC:ZOOM 10
'Zooms in around marker 1 by a factor of 10.
Characteristics
*RST value: 1
SCPI: device-specific
CALCulate<1|2>:MARKer<1 to 4>:STATe <Boolean>
This command switches on or off the currently selected marker in the selected
measurementwindow. If no indication is made, marker 1 is selected automatically. If
marker 2, 3 or 4 is selectedand used as a delta marker, it is switched to marker mode.
Example
CALC1:MARK1:STATE ON
'Switches the screen A marker ON.
Characteristics
*RST value: 1
SCPI: device-specific
CALCulate<1|2>:MARKer<1 to 4>:TRACe <numeric_value>
This command assigns the selected marker to the indicated measurement curve in
the selected measurement window.
Example
CALC1:MARK:TRAC 2
'Assigns marker 1 in screen A to trace 2.
Characteristics
*RST value: 1
SCPI: device-specific
CALCulate<1|2>:MARKer<1>:X <numeric_value>
This command positions the selected marker to the indicated frequency in the
selected measurement window.
Example
CALC:MARK:X 2MHZ
'Positions marker 1 in screen A to time 2MHz.
Characteristics
*RST value: -
SCPI: device-specific