Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 66
3.3 CALCulate Subsystem
Note for all CALCulate commands only CALCulate1 is valid in K40 as K40 has only a
single measurement screen.
3.3.1 CALCulate:DELTamarker Subsystem
The CALCulate:DELTamarker subsystem checks the delta marker functions in the K40
option. Note that for all delta marker commands the suffix for the CALCulate must be 1.
CALCulate<1|2>:DELTamarker<1 to 4>:AOFF
CALCulate<1|2>:DELTamarker<1 to 4>:STATe <Boolean>
CALCulate<1|2>:DELTamarker<1 to 4>:TRACe
CALCulate<1|2>:DELTamarker<1 to 4>:X <numeric_value>
CALCulate<1|2>:DELTamarker<1 to 4>:Y <numeric_value>
CALCulate<1|2>:DELTamarker<1 to 4>:AOFF
This command switches off all active delta markers in the specified measurement
window.
Example
CALC1:DELT:AOFF
’Switches off all delta markers in the screen A window.
Characteristic
*RST value: -
SCPI: device-specific
CALCulate<1|2>:DELTamarker<1 to 4>:STATe <Boolean>
This command switches on or off the currently selected delta marker in the
selected measurement window. If no indication is made, marker 1 is selected
automatically. If marker 2, 3 or 4 is selected and used as a marker, it is switched to
delta marker mode.
Example
CALC1:DELT:STATE ON
’Switches the screen A marker ON.
Characteristics
*RST value: 1
SCPI: device-specific
CALCulate<1|2>:DELTamarker<1 to 4>:TRACe
This command assigns the selected delta marker to the indicated measurement
curve in the selected measurement window.