Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 65
MINimum This keyword sets the parameter to the
smallest possible value.
MAXimum This keyword sets the parameter to the
largest possible value.
DEFault This keyword is used to reset the
parameter to its default value.
UP This keyword increments the parameter
value.
DOWN This keyword decrements the parameter
value.
The numeric values associated to
MAXimum/ MINimum/DEFault can be
queried by adding the corresponding
keywords to the command. They must be
entered following the quotation mark.
Example:
SENSe:FREQuency:CENTer?
MAXimum
returns the maximum possible numeric
value of the center frequency as result.
<arbitrary block program data>
This keyword is provided for commands the
parameters of which consist of a binary
data block.
3.2 ABORt Subsystem
The ABORt subsystem provide a mechanism by which running measurements can be
aborted
ABORt
Causes the current measurement being performed to be aborted.
Example
ABOR
'The FS-K40 option will attempt to abort the current active
measurement.
Characteristics
*RST value: -
SCPI: conforming