Specifications

R
&S
F
S-K40 Measurements & Settings
Software Manual 1161.8209.42 - 04 56
Fig. 20 Marker Extension Softkey Menu
SELECT MARKER
Pressing the SELECT MARKER displays the Select Marker pop-up dialog. This allows
a marker (1 to 4) to be selected. Selecting 0 selects delta marker 1. As soon as a
marker has been selected the appropriate Marker pop-up dialog is displayed. This
allows the position of the selected marker to be adjusted:
Remote CALC1:MARK1:TRAC
MKR->TRACE
Pressing the MKR->TRACE displays the Select Trace pop-up dialog. This allows the
ID of the trace to which the currently active marker is to be attached to be supplied.
The currently active marker can be selected using the SELECT MARKER softkey:
Remote CALC1:DELT1:TRAC
2.6 Trace Menu
TRACE
The TRACE hardkey brings up the Trace softkey menu. Any settings views on display
when the display softkey menu is displayed shall be closed.