Specifications

R
&S
F
S-K40 Measurements & Settings
Software Manual 1161.8209.42 - 04 55
MARKER NORM DELTA
The MARKER NORM DELTA softkey toggles the currently active marker between
normal and delta marker mode.
Remote CALC1:MARK1 …
CALC1:DELT1 …
2.5.3 Toggle Marker Display
Markers can be toggled by pressing the Marker soft-key as follows:
MARKER 1
Pressing the MARKER softkey when the marker is not displayed (softkey has grey
background) causes the Marker pop-up to be displayed and the marker to be
switched on. The associated marker then become the currently active marker.
Pressing the MARKER NORM DELTA softkey then toggles the state of this marker.
MARKER 1
Pressing the MARKER softkey when the Marker pop-up is displayed (softkey has
red background) causes the marker to be switched off.
MARKER 1
Pressing the MARKER softkey when the Marker is displayed but the Marker pop-up
is not displayed (softkey has green background) causes the Marker pop-up to be
displayed.
Because delta marker results are relative to marker 1, switching off marker 1 also
causes all delta markers to be switched off
All markers in the active screen can be switched off by pressing the ALL MARKER
OFF softkey
2.5.4 Assigning Markers to Traces
Marker can be assigned to any of the displayed traces.
MKR->
Pressing the MKR-> hardkey displays the Marker Extension softkey menu.